Dark Chocolate Dipped Candy Cane Joe Joe’s
I love peppermint so I always make sure to pick up a box of Candy Cane Joe Joe’s before they go out of stock. This year I decided to dip them in dark chocolate and sprinkle them with crushed candy cane. It is important to properly temper the chocolate for the best quality candy.
This informations comes from About.com
- Chop your chocolate. It is best to use at least 1 pound of chocolate, as it is easier to temper (and retain the temper) of larger amounts of chocolate. If this is more than you need, you can always save the extra for later use. Be sure that your chocolate is in block or bar form, not chocolate chips. The chips have additives that allow them to retain their shape at higher temperatures, and so they will not temper properly.
- Melt 2/3 of your chocolate. Place it in the top of a double boiler, set over simmering water. Securely clip a chocolate or instant-read thermometer to the side of the boiler to monitor the chocolate’s temperature.
- Stir gently but steadily as the chocolate melts and heats up. Use a rubber spatula, not a wooden or metal spoon.
- Bring the chocolate to 115 degrees Fahrenheit (46 C) for dark chocolate or 110 degrees Fahrenheit (43 C) for milk or white chocolate. Do not allow the chocolate toexceed its recommended temperature. When it is at the right temperature, remove it from the heat, wipe the bottom of the bowl, and set it on a heat-proof surface.
- Add the remaining chunks of chocolate and stir gently to incorporate. The warm chocolate will melt the chopped chocolate, and the newly added chocolate will bring down the temperature of the warm chocolate.
- Cool the chocolate. Once the chocolate gets below 84 degrees F (29 C), remove the remaining chunks of chocolate. They can be cooled, wrapped in plastic wrap, and saved for another use.
- Reheat the chocolate briefly.Place the chocolate bowl over the warm water in the double boiler for 5-10 seconds, remove it and stir, and repeat, until the temperature reaches 88-89 degrees F (31 C), or 87 F (30 C) for milk and white chocolate. Do not leave the chocolate over the hot water, or allow it to exceed 91 degrees.
- Your chocolate should now be tempered! To make sure it has been done properly, do a spot test: spread a spoonful thinly over an area of waxed paper and allow it to cool. If the chocolate is shiny and smooth, it is properly tempered. If it is dull or streaky, it has not been tempered correctly. Do not skip the test. I usually set my timer for 10 minutes. The chocolate should look perfect, if it’s not, start over using the same chocolate. Just reheat it and add new chunks of chocolate to cool it down.